Do you know about diesel high pressure common rail system?

2020-03-19 18:16:54 meteor 66

As the hero behind the scenes, BOSCH has contributed countless technologies and inventions to the global automotive industry for more than 100 years, and has gradually grown into the world's largest automotive technology supplier. Today, I will take you to know the product from Bosch-diesel high-pressure common rail system, and see how it works.



图片关键词



In 1892, German engineer Rudolf Diesel invented the world's first diesel engine and named the diesel engine after his Diesel. We all know that many characteristics of diesel are different from gasoline, such as viscosity (including dynamic viscosity, kinematic viscosity, and conditional viscosity). Intuitively, diesel is more viscous than gasoline; Compression ignition is used. These characteristics of diesel are destined to use high pressure to make it emit its due energy, so early diesel engines used high pressure gas cylinders to provide a certain pressure for the fuel supply system.


In 1927, Bosch transformed many years of research into mechanical fuel pumps into manufacturing, and gradually, huge gas cylinders became history.

    图片关键词

The traditional diesel injection system using a mechanical fuel pump is driven by a camshaft. The fuel injection pressure increases with the increase of the engine speed and the fuel injection quantity. This diesel system has problems such as unstable atomization effects, and difficult cold starts At the same time, it has been unable to meet the increasingly stringent emission standards and the desire to reduce fuel consumption.


A diesel supply technology that has been constrained by precision electronic control for decades. With the rapid development of electronic technology in the 1980s and 1990s, it has finally been completely applied to automotive diesel engines. This technology is an electronically controlled diesel high-pressure common rail system. It has higher fuel injection pressure, better atomization effect, lower fuel consumption and cleaner emissions. All this is inseparable from the constant trial and error and efforts of Bosch.


What is a high pressure common rail system


The high-pressure common rail system refers to a fuel supply method that completely separates the generation of injection pressure and the injection process from each other in a closed-loop system composed of a high-pressure oil pump, a pressure sensor, and an electronic control unit (ECU). Diesel injection systems are completely different. It is a high-pressure fuel pump that delivers high-pressure fuel to the fuel rail. The oil pressure in the fuel rail is used to achieve precise control. The pressure of the high-pressure fuel pipe is independent of the engine speed. .


Composition of high-pressure common rail system


The diesel high-pressure common rail injection system consists of a hydraulic system and an electronic control system. The hydraulic system is divided into a low-pressure hydraulic system and a high-pressure hydraulic system. Low-pressure hydraulic system includes fuel tank, fuel pump, fuel filter, and low-pressure oil pipe; high-pressure hydraulic system includes high-pressure pump, high-pressure rail, injector, and high-pressure oil pipe; Electronic Diesel Control (EDC) includes sensors , Electronic Control Unit (ECU), actuator (including fuel injector with solenoid valve, pressure control valve, glow plug control unit, boost pressure regulator, exhaust gas circulation regulator, throttle valve, etc. ) And harness.


Among them, the injector, high-pressure pump, high-pressure oil rail, and electronic control unit are the four core components of the diesel common rail system.


An injector is a component that atomizes fuel and distributes it in the combustion chamber of an engine. The injection time and duration of the common rail injector are accurately calculated by the electronic control unit to give a signal, and then controlled by a solenoid valve.

图片关键词

The role of the high pressure pump is to compress the fuel from a low pressure state to a high pressure state through a plunger to meet the system and engine requirements for fuel injection pressure and fuel injection.


The role of the high-pressure fuel rail is to store fuel, while suppressing pressure fluctuations due to high-pressure pump oil supply and fuel injection from the injector, ensuring stable system pressure. The high-pressure oil rail is commonly owned by each cylinder, and it is the symbol of the common rail system.


The electronic control unit is like the brain of the engine. It collects the operating conditions of the engine, calculates them in combination with the stored characteristic map, and transmits the signals to the actuator to realize the functions of engine operation control and fault diagnosis.

图片关键词

Working principle of high pressure common rail system


The electronic control unit accurately calculates the current fuel injection amount based on various real-time parameters (vehicle speed, throttle opening, crankshaft speed, camshaft speed, rail pressure, etc.) (the amount of fuel injection depends on the rail pressure and The length of the solenoid valve opening time), and then control the opening and closing of the solenoid valve as an actuator, diesel is injected into the cylinder to achieve the best combustion under the current operating conditions.


The high-pressure common rail system enables stronger power, lower fuel consumption and cleaner emissions.

图片关键词

Talk about high pressure oil rails


The high-pressure fuel rail distributes the high-pressure fuel provided by the fuel supply pump to each injector, and functions as a pressure accumulator. Its volume should reduce the supply pressure fluctuation of the high-pressure oil pump and the pressure shock caused by the fuel injection process of each injector to control the pressure fluctuation in the high-pressure oil rail below 5MPa. However, its volume should not be too large to ensure that the common rail has sufficient pressure response speed to quickly track changes in diesel engine operating conditions.


Pressure sensors, fluid buffers (restrictors) and pressure limiters are also installed on the high-pressure rail. The pressure sensor provides the ECU with the pressure signal of the high-pressure fuel rail; the fluid flow buffer ensures that the fuel supply to the fuel injector is cut off when a fuel leak occurs in the fuel injector, and can reduce the pressure fluctuation in the common rail and the high-pressure fuel pipe; The limiter ensures that the pressure in the high-pressure rail is quickly released when the pressure of the high-pressure rail is abnormal.

图片关键词

Below are a few high-pressure rails from Bosch.


HFR hot forged rails are based on Bosch's global platform research and development, mature technology, reliable and durable, especially optimized for the Chinese market. Local production, suitable for passenger cars and light commercial vehicles. System pressure is up to 1600 / 1800bar (1bar is roughly equivalent to a standard atmospheric pressure).


图片关键词


HFRN hot forged rail, suitable for medium and heavy commercial vehicles. With the limp home function, even if the system fails, it can still drive without affecting the safety to meet the special needs of commercial vehicles. The system pressure is also as high as 1600 / 1800bar.


图片关键词


LWR laser welding rails are also developed based on Bosch's global platform, with advanced technology and strong reliability. Suitable for passenger cars and light commercial vehicles, the system can withstand a pressure of 1600bar.


图片关键词


LWRN laser welding rail, suitable for medium and heavy commercial vehicles, with limp home function, the system can also withstand the pressure of 1600bar.

图片关键词

Of course, common-rail technology is also used in some gasoline engines with direct fuel injection. For example, Volkswagen TSI and Ford EcoBoost series gasoline engines use common-rail systems.


图片关键词


Summary: The purpose of electronic control of high-pressure common rail diesel in diesel engines is to improve the fuel economy and emissions of diesel engines. At the same time, from the aspects of power performance, fuel consumption, and drivability, electronically controlled high-pressure common rail diesel systems are also increasing The more accepted by the market. Of course, in China, the use of diesel vehicles has been subject to many restrictions, for various reasons. I will not repeat them here, but I look forward to the day when technology and regulations will change all this. Thank you for your interest in testing with me!


13715295921

Monday to Sunday AM9:00~PM8:00

在线留言
Phone
Products
WeChat
QQ Service